JnF's SWGCTool v2.0.2 - Official Thread

Ideas and discussions on third party tools and utilities

Moderator: Forum Moderator

Tharek Tolemac
Intermediate Crafter
Posts: 139
Joined: Sun Jun 03, 2007 8:48 am

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Tharek Tolemac » Thu Jun 05, 2008 12:18 pm

panino76 wrote:
  • Click on the first voice of the menu you opened
The option is there, but it isnt selectable. (Blocked)

User avatar
panino76
Intermediate Crafter
Posts: 184
Joined: Mon May 19, 2008 1:26 pm
Location: Italy

Re: JnF's SWGCTool v1.8 - Official Thread

Post by panino76 » Thu Jun 05, 2008 12:33 pm

Tharek Tolemac wrote:
panino76 wrote:
  • Click on the first voice of the menu you opened
The option is there, but it isnt selectable. (Blocked)
You're right...my fault....first click on the button as shown in the picture. Then, you should be able to click it. Remember that the word "Missing" is translated in your language, and that there could be more than a voice with that tag.

On a side note, it's an Excel bug, not specific of this file, and it's due to some programs that were installed on your machine (like nero burning rom just to say one) and then removed, leaving some constraints with excel that now is unable to find some files related to those installations.

Artax Wavingwalker
__________________________________________
The NEW Jenner and Fooman Tool

Hodru
I've been here for 30 days and all I get is this lousy rank?!?!
Posts: 31
Joined: Sun Jul 22, 2007 10:41 pm

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Hodru » Thu Jun 05, 2008 2:08 pm

Worked like a charm! Thank you very much for your effort in this! With this tool and Zimoon's SWGAide, I'm one happy crafter!

User avatar
panino76
Intermediate Crafter
Posts: 184
Joined: Mon May 19, 2008 1:26 pm
Location: Italy

Re: JnF's SWGCTool v1.8 - Official Thread

Post by panino76 » Thu Jun 05, 2008 2:38 pm

Hodru wrote:Worked like a charm! Thank you very much for your effort in this! With this tool and Zimoon's SWGAide, I'm one happy crafter!
I'm happy you like it. :)

Did you had the same problems Tharek experienced?

Artax Wavingwalker
__________________________________________
The NEW Jenner and Fooman Tool

Hodru
I've been here for 30 days and all I get is this lousy rank?!?!
Posts: 31
Joined: Sun Jul 22, 2007 10:41 pm

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Hodru » Thu Jun 05, 2008 2:46 pm

I did, on three computers. Once I figured out how to get the references icon to not be grayed out it was a simple fix that worked well.

Tharek Tolemac
Intermediate Crafter
Posts: 139
Joined: Sun Jun 03, 2007 8:48 am

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Tharek Tolemac » Thu Jun 05, 2008 7:25 pm

Ok, problem solved.

Now, I will have a closer look to that in a quiet moment :)

User avatar
panino76
Intermediate Crafter
Posts: 184
Joined: Mon May 19, 2008 1:26 pm
Location: Italy

Re: JnF's SWGCTool v1.8 - Official Thread

Post by panino76 » Thu Jun 05, 2008 9:52 pm

Tharek Tolemac wrote:Ok, problem solved.

Now, I will have a closer look to that in a quiet moment :)
8)

Artax Wavingwalker
__________________________________________
The NEW Jenner and Fooman Tool

jo-vian
Novice Crafter
Posts: 1
Joined: Sun Jun 01, 2008 3:58 pm

Re: JnF's SWGCTool v1.8 - Official Thread

Post by jo-vian » Sat Jun 07, 2008 7:37 am

Thanks for the good work panino! :D I have been dabbling with the old tool for some time since the NGE and I only would get so far before uncovering another error. :cry: I'm glad you got past that. I noticed you dropped the part of the tool that tried to estimate the final experimentation of the crafted item. :?: One question though since you have dropped the professions down to the 4 traders can you add the Jedi schematics back in? Some of these resources sell quite well when best on server. Also, if willing I would like to see the new shipwright collection schematics as they make some of the best equipment for pilots.

User avatar
panino76
Intermediate Crafter
Posts: 184
Joined: Mon May 19, 2008 1:26 pm
Location: Italy

Re: JnF's SWGCTool v1.8 - Official Thread

Post by panino76 » Sat Jun 07, 2008 8:55 am

jo-vian wrote:Thanks for the good work panino! :D I have been dabbling with the old tool for some time since the NGE and I only would get so far before uncovering another error. :cry: I'm glad you got past that. I noticed you dropped the part of the tool that tried to estimate the final experimentation of the crafted item. :?: One question though since you have dropped the professions down to the 4 traders can you add the Jedi schematics back in? Some of these resources sell quite well when best on server. Also, if willing I would like to see the new shipwright collection schematics as they make some of the best equipment for pilots.
For what concerns the old tool that extimated the final experimentation, I dropped it cause it was quite heavy on the computation and it was difficoult to try to optimize it, also, for some odd reasons, it was recalculated every operation you were goin to make on the worksheet...for those reasons I introduced the new "Crafting Sheet", it gives you a good estimation of the final value split per resource, I'll see in the future how to improve/potentiate it.

For what concerns the lightsabers, it's in my schedule to add them under the munition profession (see lightsabers = weapons = munition trader)

For the shipwright schems, I'm working with my fellow shipwright to have the complete list (and that comprehends the nova orion schems too), I plan to add them in the next release of the tool

Artax Wavingwalker
__________________________________________
The NEW Jenner and Fooman Tool

User avatar
panino76
Intermediate Crafter
Posts: 184
Joined: Mon May 19, 2008 1:26 pm
Location: Italy

Re: JnF's SWGCTool v1.8 - Official Thread

Post by panino76 » Thu Jun 12, 2008 12:43 am

I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.

Artax Wavingwalker
__________________________________________
The NEW Jenner and Fooman Tool

Sobuno
Developer
Posts: 2589
Joined: Sun Mar 25, 2007 2:17 am
Contact:

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Sobuno » Thu Jun 12, 2008 10:07 am

panino76 wrote:I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.
We could probably mirror it here too if you want

User avatar
panino76
Intermediate Crafter
Posts: 184
Joined: Mon May 19, 2008 1:26 pm
Location: Italy

Re: JnF's SWGCTool v1.8 - Official Thread

Post by panino76 » Thu Jun 12, 2008 10:46 am

Sobuno wrote:
panino76 wrote:I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.
We could probably mirror it here too if you want
Of course, I didn't know if/how it was possible to upload on this site. It's enough to upload it in the Filename (like attaching an image)?

Artax Wavingwalker
__________________________________________
The NEW Jenner and Fooman Tool

Sobuno
Developer
Posts: 2589
Joined: Sun Mar 25, 2007 2:17 am
Contact:

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Sobuno » Thu Jun 12, 2008 11:11 am

panino76 wrote:
Sobuno wrote:
panino76 wrote:I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.
We could probably mirror it here too if you want
Of course, I didn't know if/how it was possible to upload on this site. It's enough to upload it in the Filename (like attaching an image)?
I think so

Gaflem
Novice Crafter
Posts: 3
Joined: Sat May 17, 2008 5:57 am

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Gaflem » Thu Jun 12, 2008 3:48 pm

Umm, the site that the download link sends me to looks a lot like some sort of porn site. Do I really have to sign up for an account there. I know it says free but I just hate signing up for sites that look so unsecure.

Sobuno
Developer
Posts: 2589
Joined: Sun Mar 25, 2007 2:17 am
Contact:

Re: JnF's SWGCTool v1.8 - Official Thread

Post by Sobuno » Thu Jun 12, 2008 3:57 pm

Gaflem wrote:Umm, the site that the download link sends me to looks a lot like some sort of porn site. Do I really have to sign up for an account there. I know it says free but I just hate signing up for sites that look so unsecure.
I've taken the liberty of attaching the download to this post:

Edit: Removed, see new version

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest