Page 2 of 26

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 12:18 pm
by Tharek Tolemac
panino76 wrote:
  • Click on the first voice of the menu you opened
The option is there, but it isnt selectable. (Blocked)

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 12:33 pm
by panino76
Tharek Tolemac wrote:
panino76 wrote:
  • Click on the first voice of the menu you opened
The option is there, but it isnt selectable. (Blocked)
You're right...my fault....first click on the button as shown in the picture. Then, you should be able to click it. Remember that the word "Missing" is translated in your language, and that there could be more than a voice with that tag.

On a side note, it's an Excel bug, not specific of this file, and it's due to some programs that were installed on your machine (like nero burning rom just to say one) and then removed, leaving some constraints with excel that now is unable to find some files related to those installations.

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 2:08 pm
by Hodru
Worked like a charm! Thank you very much for your effort in this! With this tool and Zimoon's SWGAide, I'm one happy crafter!

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 2:38 pm
by panino76
Hodru wrote:Worked like a charm! Thank you very much for your effort in this! With this tool and Zimoon's SWGAide, I'm one happy crafter!
I'm happy you like it. :)

Did you had the same problems Tharek experienced?

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 2:46 pm
by Hodru
I did, on three computers. Once I figured out how to get the references icon to not be grayed out it was a simple fix that worked well.

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 7:25 pm
by Tharek Tolemac
Ok, problem solved.

Now, I will have a closer look to that in a quiet moment :)

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 05, 2008 9:52 pm
by panino76
Tharek Tolemac wrote:Ok, problem solved.

Now, I will have a closer look to that in a quiet moment :)
8)

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Sat Jun 07, 2008 7:37 am
by jo-vian
Thanks for the good work panino! :D I have been dabbling with the old tool for some time since the NGE and I only would get so far before uncovering another error. :cry: I'm glad you got past that. I noticed you dropped the part of the tool that tried to estimate the final experimentation of the crafted item. :?: One question though since you have dropped the professions down to the 4 traders can you add the Jedi schematics back in? Some of these resources sell quite well when best on server. Also, if willing I would like to see the new shipwright collection schematics as they make some of the best equipment for pilots.

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Sat Jun 07, 2008 8:55 am
by panino76
jo-vian wrote:Thanks for the good work panino! :D I have been dabbling with the old tool for some time since the NGE and I only would get so far before uncovering another error. :cry: I'm glad you got past that. I noticed you dropped the part of the tool that tried to estimate the final experimentation of the crafted item. :?: One question though since you have dropped the professions down to the 4 traders can you add the Jedi schematics back in? Some of these resources sell quite well when best on server. Also, if willing I would like to see the new shipwright collection schematics as they make some of the best equipment for pilots.
For what concerns the old tool that extimated the final experimentation, I dropped it cause it was quite heavy on the computation and it was difficoult to try to optimize it, also, for some odd reasons, it was recalculated every operation you were goin to make on the worksheet...for those reasons I introduced the new "Crafting Sheet", it gives you a good estimation of the final value split per resource, I'll see in the future how to improve/potentiate it.

For what concerns the lightsabers, it's in my schedule to add them under the munition profession (see lightsabers = weapons = munition trader)

For the shipwright schems, I'm working with my fellow shipwright to have the complete list (and that comprehends the nova orion schems too), I plan to add them in the next release of the tool

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 12, 2008 12:43 am
by panino76
I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 12, 2008 10:07 am
by Sobuno
panino76 wrote:I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.
We could probably mirror it here too if you want

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 12, 2008 10:46 am
by panino76
Sobuno wrote:
panino76 wrote:I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.
We could probably mirror it here too if you want
Of course, I didn't know if/how it was possible to upload on this site. It's enough to upload it in the Filename (like attaching an image)?

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 12, 2008 11:11 am
by Sobuno
panino76 wrote:
Sobuno wrote:
panino76 wrote:I've been said the server where I've uploaded the file was not working properly and after a quick check, I decided to upload it on a more stable (I hope) server. Not the download should work fine.
If you experience other issues trying to download it, pls send me a PM.
I apologize for the inconvenience.
We could probably mirror it here too if you want
Of course, I didn't know if/how it was possible to upload on this site. It's enough to upload it in the Filename (like attaching an image)?
I think so

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 12, 2008 3:48 pm
by Gaflem
Umm, the site that the download link sends me to looks a lot like some sort of porn site. Do I really have to sign up for an account there. I know it says free but I just hate signing up for sites that look so unsecure.

Re: JnF's SWGCTool v1.8 - Official Thread

Posted: Thu Jun 12, 2008 3:57 pm
by Sobuno
Gaflem wrote:Umm, the site that the download link sends me to looks a lot like some sort of porn site. Do I really have to sign up for an account there. I know it says free but I just hate signing up for sites that look so unsecure.
I've taken the liberty of attaching the download to this post:

Edit: Removed, see new version